FM companies rarely lose money on the work they do. They lose it on the work they do and never bill: the call-out that was not in scope, the parts fitted on a Friday night, the variation agreed on the phone. Then they lose time on the invoices they do send, because the client disputes a line the contractor cannot prove. This guide covers how an FM service contract turns into an invoice: the charge types, the monthly billing cycle, the UAE VAT rules on timing and credit notes, where KPI deductions belong, what goes in a valuation pack, and a worked example.
Key takeaways
- Bill from closed work orders. Every billable line should trace back to a job with a time, a location and evidence.
- Calculate deductions before you invoice. A deduction agreed after the invoice becomes a tax credit note.
- Watch the 14-day clock. UAE rules require the tax invoice within 14 days of the date of supply, so the month-end cut-off has to be quick.
- Approve variations before the work. Out-of-scope work without written approval is the most common unpaid line.
The charge types in an FM contract
Most GCC FM contracts mix several ways of charging. Each needs different evidence from the field before it can be billed, and that evidence has to be captured when the work happens, not reconstructed at month end.
| Charge type | How it is priced | Evidence needed before billing |
|---|---|---|
| Fixed monthly fee | Lump sum for the agreed scope: PPM, manned services and reactive work up to the contract's limits. | Completed PPM and the KPI results for the month, since deductions are taken from this fee. |
| Call-outs outside scope | A rate per visit or per hour from the contract's rate schedule. | A work order for each visit with the requester, time on site and the reason it falls outside scope. |
| Materials and spare parts | Cost plus the agreed markup, or a price list. Often only above a threshold per item or per job. | Parts used against each job, with supplier invoices for anything charged at cost plus. |
| Variations and small works | A quotation approved by the client before the work starts. | The approved quote, the work order and completion photos. |
| Pass-through costs | Charged at cost, sometimes with a handling fee: permits, authority fees, specialist subcontractors. | The third-party invoice and the client's approval where the contract asks for it. |
The scope line between fixed fee and chargeable work should be written into the contract set-up, not left to the technician. If the system knows which assets, areas and job types are inside the fixed fee, it can flag a job as chargeable when it is logged, which is when the client should hear about it.
The monthly billing cycle
A clean month end follows the same steps every time. The faster the first three run, the more of the 14-day invoicing window is left for the client to review the pack.
- Cut-off. Fix the period end. Jobs completed after it go to next month; nothing is billed twice.
- Close jobs. Supervisors review completed work orders, check evidence and parts, and close them. Jobs still open are listed, not billed.
- Calculate KPIs. SLA response and resolution, PPM completion and any audit scores, using the definitions in the contract. See our guide to FM contractor performance evaluation.
- Valuation pack. One document the client can check line by line (see below).
- Client approval. The client agrees the KPI results and chargeable lines, or raises queries against specific work orders.
- Tax invoice and collection. Issue the invoice for the agreed amount, post it to the finance system and track it to payment.
UAE VAT rules that shape FM billing
Four parts of the UAE VAT framework matter most for an FM contract billed monthly. The articles below are from the Federal Decree-Law No. 8 of 2017 on VAT and its Executive Regulation, as published in English by the Federal Tax Authority (both are marked as unofficial translations).
| Rule | What it says | What it means for FM billing |
|---|---|---|
| Decree-Law Art. 3 | A standard rate of 5% applies to taxable supplies. | FM services are billed with 5% VAT unless a specific relief applies. |
| Decree-Law Art. 26 | For contracts with periodic payments or consecutive invoices, the date of supply is the earliest of the invoice date, the payment due date on the invoice or the date payment is received, and not more than one year after the services are provided. | A monthly FM contract creates a tax point each period. Work that is never invoiced still reaches a date of supply within a year. |
| Executive Regulation Art. 59(13) | The tax invoice is issued within 14 days of the date of supply under Article 25 or 26, with some exceptions. | The cut-off, KPI calculation and client review have to fit a short window. |
| Decree-Law Arts. 61, 62 and 70 | Output tax is adjusted when the agreed consideration is altered; where tax was overstated the supplier issues a tax credit note to the recipient. | A deduction or price change agreed after the invoice needs a tax credit note, not an edited invoice. |
| Executive Regulation Art. 60 | A tax credit note shows the words “Tax Credit Note”, both parties' details and tax registration numbers, its date, the original and corrected values, the reason, and enough to identify the original supply. | Keep the work order and KPI references that explain the reason with the credit note. |
UAE e-invoicing adds to this: once a business is in scope, invoices and credit notes are exchanged electronically and cannot simply be reissued. The timeline and what it changes for FM teams are in our post on UAE e-invoicing and CAFM. Saudi Arabia and the other GCC states have their own VAT laws, so check the local rules for contracts outside the UAE.
Where KPI deductions belong
Many FM contracts reduce the monthly fee when KPIs are missed, usually as a percentage per KPI with a cap. The deduction is a commercial matter between the parties, but its timing decides the paperwork.
Agreed before the invoice
Show the deduction as a negative line on the invoice, referencing the KPI report. The invoice then states the correct consideration, VAT is calculated on the net amount, and no credit note is needed. This is the cleaner route, and the reason to calculate KPIs from system data in the first days of the month.
Agreed after the invoice
If the client disputes the KPI results after the invoice is issued, the consideration has changed. Under Articles 61, 62 and 70 that means a tax credit note for the deduction and its VAT. It is allowed, but it adds a document to both parties' VAT records and, once e-invoicing applies, a second electronic transaction. The SLA definitions in the contract are what stop that dispute: if both sides measure response time the same way, from the same log, there is little to argue about.
What goes in the valuation pack
The pack is what the client's FM manager signs off. Build it from the system, in the same layout every month, so the client can check it quickly.
- A one-page summary: fixed fee, chargeable lines, deductions, net amount before VAT.
- Chargeable call-outs and variations, each with its work order number, date, location and approval reference.
- Materials, each with the job it was used on, cost, markup and supplier invoice reference.
- The KPI report: each KPI, target, result, deduction rule and amount.
- PPM completion for the month, with any missed tasks and the reason.
- Open jobs carried forward, so the client sees nothing has been dropped.
- Proof of work for disputed or high-value lines: photos, signatures and time stamps. See technician proof of work.
Worked example: one month of a mall contract
An FM company maintains a shopping mall in the UAE under a contract with a fixed monthly fee, a rate per out-of-scope call-out, materials at cost plus an agreed markup, and KPI deductions taken from the fixed fee. All figures are illustrative.
| Line | Basis | Amount (AED) |
|---|---|---|
| Fixed monthly fee | Contract schedule | 120,000 |
| Call-outs outside scope | 6 tenant-area visits at 450 each, each with a work order | 2,700 |
| Materials | Parts at cost 8,000 plus 10% markup, each linked to a job | 8,800 |
| KPI deduction | Urgent response target missed: 2% of the fixed fee, agreed before invoicing | -2,400 |
| Net before VAT | 129,100 | |
| VAT at 5% | Decree-Law Art. 3 | 6,455 |
| Invoice total | 135,555 |
Now suppose the KPI report was late and the company invoiced the full 131,500 plus 6,575 VAT, a total of 138,075, before the client raised the missed response target. The company then issues a tax credit note for 2,400 plus 120 VAT, 2,520 in all. The client pays the same 135,555 in the end, but both sides now carry two documents instead of one, and the cash arrives later because the first invoice sat in dispute.
Where FM revenue leaks
- Out-of-scope jobs logged as normal reactive work, so nobody flags them as chargeable.
- Parts taken from site stock without being booked to a job.
- Variations agreed verbally, with no approved quote to bill against.
- Call-outs billed weeks late, when the client no longer remembers the request.
- KPI disputes that hold up the whole invoice, when only one line is in question.
- Rates kept in a spreadsheet that does not match the latest contract amendment.
Where Reflexion fits
Want to see a month end built from work orders?
We can walk through contract set-up, chargeable job flags, KPI deductions and the client's view of the invoice.
Frequently Asked Questions
What does contract to cash mean in facility management?
It is the chain from the signed FM contract to money in the bank: setting up the contract's scope, rates and SLAs, recording the work done against it, calculating what can be billed each period including call-outs, materials and KPI deductions, getting the client's approval, issuing the tax invoice and collecting payment.
When should an FM company in the UAE issue the monthly tax invoice?
For contracts with periodic payments, Article 26 of the VAT Decree-Law sets the date of supply as the earliest of the invoice date, the payment due date shown on the invoice, or the date payment is received, and no later than one year after the services are provided. Article 59(13) of the Executive Regulation, as amended in 2024, requires the tax invoice within 14 days of the date of supply. Check your own position with your tax adviser.
Should KPI deductions be shown on the invoice or issued as a credit note?
Where the deduction is agreed before invoicing, show it as a line on the invoice so the invoice states the correct consideration. Where it is agreed after the invoice was issued, the consideration has changed, which Article 61 of the VAT Decree-Law lists as a reason to adjust output tax, and Articles 62 and 70 require a tax credit note to the client.
What should a monthly FM valuation pack contain?
A summary of the amounts billed, the fixed fee, approved call-outs and variations with their work order numbers, materials with cost and agreed markup, the KPI results and any deduction calculated under the contract, a list of open jobs carried to the next period, and the proof of work for anything the client may question.
Related reading
UAE E-Invoicing and CAFM
The timeline and what it changes for maintenance invoices and credit notes.
FM Contractor Performance Evaluation
The KPI scorecard that monthly deductions are calculated from.
CAFM ERP Integration
How work orders, costs and invoices flow to finance.
Technician Proof of Work
The field evidence behind every billable line.
